About Slice Lab
Who's behind this site and why I built it.
Our Mission
Slice Lab was created with one goal: give every 3D printing enthusiast the information they need to choose the right filament and printer, tune their slicer, and fix print failures — all in one place, for free.
I noticed that reliable filament data was scattered across dozens of manufacturer datasheets, Reddit threads, and YouTube videos, each giving slightly different advice. Beginners were overwhelmed, and even experienced makers wasted hours searching for a simple temperature range or retraction setting. So I set out to consolidate that knowledge into a single, well-organized reference that anyone can use.
Every article, table, and tool on Slice Lab is based on hands-on testing where possible, manufacturer specifications, and community-validated data. I don't publish content for the sake of filling pages — if it's on this site, it's because I believe it will genuinely help you get better prints.
Who's Behind Slice Lab
Hi, I'm Louis. I'm a French maker and software developer, and Slice Lab is my personal project. Every article, table and tool on this site is written, tested and maintained by me.
I run my own printer at home for everyday prints, upgrades and — inevitably — troubleshooting sessions. For the machines and materials I don't own, I don't pretend otherwise: those pages are built from manufacturer specifications, community feedback (forums, owner groups) and cross-checked reviews, and I say so. When data comes from my own testing, I mention that too.
My background is in software development, which is also why the site's tools — the filament comparator, the visual troubleshooter — exist: I'd rather build a sortable table once than dig through twenty datasheets every time I change material.
Spotted an error? Tell me — corrections are published with the article's revision date.
What You'll Find on Slice Lab
Filament Comparison Table
An interactive database of 20+ materials with sortable properties, radar chart visualization, and AI-ready data export. Filter by application — outdoor use, heat resistance, flexibility, budget.
Slicer Settings Guide
A complete reference for every slicer parameter — layer height, walls, infill, temperature, speed, retraction, supports, cooling, and advanced settings — with recommended values for each material.
Troubleshooting Tool
A visual diagnostic tool covering 12 common print problems. Answer a few questions to identify your issue, then follow step-by-step solutions with diagrams.
In-Depth Guides
Detailed articles on PLA vs PETG, resin vs FDM, nozzle sizes, humidity management, printer upgrades, multi-color printing, STL platforms, and 3D modeling tools.
Contact
Have a question, spotted an error, or want to suggest a topic? I'd love to hear from you.
Email: [email protected]
Slice Lab is an independent project.